How to Change Trico 2003 Acura RL Wiper Blades

Buy your new Standard Steel Frame Wipers

• Precision Cut Rubber Edge
• Steel Superstructure And Twin Rail Design
• Seasonal (Note: Not recommended for extreme freezing conditions)
• Good economical windshield wiping for your Acura RL
• 
  

Prepare your Acura RL for an easier wiper change

Turn ON your wipers then turn off your Acura RL when the wipers are at their mid-way point on your windshield

Lift your wipers up from the windshield

With your wipers stopped midway on your windshield it should be easy to lift your wipers up and away from your windshield.
Your old wipers should stick out, away, from your windshield. Now allowing for easy access during the rest of the changing process.

Before you remove old wiper blades

Be sure to take note of which new blade length goes on which side.
Measure or just compare old blade length to the new Trico® wiper blades.
Then place the new blades on the correct side.

Remove old wiper blades

Your 2003 Acura RL has a small hook attachment for the windshield wipers to connect with.

Different wiper manufacturers use different style attachments for the small hook. Look for a button or a latch to lift and slide off the old wiper blade.

Connect the new Trico® Standard Steel Frame Wipers

• Push the arm end through the hole in front of the adaptor.
  
  
• Then push blade on to the arm hook. You will feel a "click".